Symphony™ Booster Installation Checklist

This checklist is not intended to replace your car seat instruction manual. You must read the instruction manuals for your car seat and your vehicle before using the car seat. Booster Installation Checklist Child Requirements Weight: 30 – 100 lbs (13.6 – 45.3 kg) Height: Less than 57 inches (145 cm); Ears below the top of the headrest Age: At least three years old
Print Out a PDF of the Symphony Booster Installation Checklist
1.	Convert child restraint to booster seat.
	See “Converting into a Booster Seat,” p. 34 of the Owner's Manual.
2.	Secure booster seat to the vehicle seat.
		Make sure the bottom and back of the booster seat are touching vehicle seat and back.
		If your vehicle has LATCH, make sure the booster seat is securely installed to vehicle seat with SureLatch™ connectors, p. 27 of the Owner's Manual.
3.	Place the child in the booster seat.
		Make sure the child’s back and bottom are flat against the back and bottom surfaces of the booster seat.
4.	Adjust headrest for proper shoulder belt fit.
		See “Adjusting the Headrest,” p. 40 of the Owner's Manual.
5.	Secure child and booster seat to vehicle seat.
		Stretch the lap/shoulder belt across the child and fasten the buckle. Make certain the shoulder belt is threaded through the shoulder belt guide.
6.	Check your work.
		Make sure the lap belt is stretched low and snug across the child’s hips, within the belt guides, and fastened into the buckle. The shoulder belt must cross the child midway between his/her shoulder and neck.

Lost your Symphony Owner's Manual? Click here for a replacement.
To make installation easier, watch the Symphony Installation Video