contact us: parentlink@evenflo.com
Facebook Twitter Evenflo Newsletter Blog
Side Impact Testing
What is LATCH
A Safer Alternative
Car Seat Installation Videos
Home Safety Made Easier
Skip Navigation Links

Discovery™ Installation Checklist

This checklist is not intended to replace your car seat instruction manual. You must read the instruction manuals for your car seat and your vehicle before using the car seat.

Checklist for Rear-facing Child Restraint

Child Requirements
Weight: 5 – 22 lbs
Maximum Height: 19 – 29 inches tall

Print Out a PDF of the Discovery™ Installation Checklist
1. Child restraint for children who weigh 5 – 22 lbs AND between 19- 29 inches tall.
 

IMPORTANT: This child restraint is designed for use ONLY in the rear-facing position. NEVER use this child restraint in the forward-facing position.

2. Top of the child's head is at least 1 inch below the top of the child restraint seat back.
3. Installation with the convenience base can be secured with either the LATCH system or the vehicle seat belt.
4. Locking clip is installed for shoulder and lap belts, if needed.
5.
Shoulder harness straps MUST start as close as possible, but NEVER above, the child's shoulder with no more than two finger-widths from the child.
6.
Buckle tongues are fully engaged.
7.
Chest clip is fastened and at armpit level.
8.
To properly secure this child restraint, it MUST NOT move more than 1 inch from side-to-side or from front-to-back at the rear-facing belt path.
9.
The level line MUST be level with the ground.
 
Lost your Discovery™ Owner's Manual? Click here for a replacement.
To make installation easier, watch the Discovery™ Installation Video

 

 
Safety Made Easier HomepageLearn More About Car Seat SafetyLearn More About Exersaucer SafetyLearn More About Gate Safety
© 2012 Evenflo Company, Inc. Trademarks owned by Evenflo Company, Inc. and/or their affiliates       Sitemap
Baby Photos