Titan™ Installation Checklist
|
This checklist is not intended to replace your car seat instruction manual. You must read the instruction manuals for your car seat and your vehicle before using the car seat.
Checklist for Rear-facing Child Restraint
Child Requirements
Weight: 5 – 35 lbs
Height: at least 19 inches tall
|
| Print Out a PDF of the Titan™ Installation Checklist |
| 1. |
Child restraint for children who weigh 5 – 35 lbs AND at least 19 inches tall. |
| |
IMPORTANT: When using this restraint rear-facing, DO NOT loosen the vehicle seat belt to provide more leg room as this will prevent the child restraint from protecting your child. |
| 2. |
Top of the child's head is at least 1 inch below the top of the child restraint seat back. |
| 3. |
Installation of child restraint can be secured with either the LATCH System or with the vehicle seat belt. |
| 4. |
Locking clip is installed for shoulder and lap belts, if needed. |
| 5. |
Shoulder harness straps MUST be on the child's shoulders and snug with no more than two finger-widths of space between the child and the harness strap. |
| 6. |
Buckle tongues are fully engaged. |
| 7. |
Chest clip is fastened and at armpit level. |
| 8. |
To properly secure this child restraint, it MUST NOT move more than 1 inch from side-to-side or from front-to-back at the rear-facing belt path. |
| 9. |
The level line MUST be level with the ground. |
| |
| Lost your Titan™ Owner's Manual? Click here for a replacement. |
| To make installation easier, watch the Titan™ Installation Video |